Product Details:
Payment & Shipping Terms:
|
Product Name:: | Semi Synthetic Cutting Fluid | Origin:: | Hebei China |
---|---|---|---|
Brand Name:: | YARUNS | Application:: | Industrial Lubricants, Carbon Steel, Cast Iron, Stainless Steel And Other Ferrous Metals |
General Composition:: | Crude | Features:: | Cooling, Lubrication, Rust Prevention |
Main Ingredients:: | Anti-wear Cutting Fluid | Colour:: | Yellowish Brown |
High Light: | 200 Liter Semi Synthetic Cutting Oil,200 Liter Metal Cutting Fluid,Antirust Semi Synthetic Cutting Oil |
High-strength work/ferrous metal and non-ferrous metal cutting fluid Micro-emulsion cutting fluid YR 8001G
performance:
YR8001G is suitable for ferrous metal cutting processing, milling and grinding processing, including turning, drilling, boring, reaming and many other processing methods. The product has excellent lubricity, hard water cooling resistance and defoaming. It has outstanding lubrication performance and can be Ensure the surface finish of the machined surface. The hard water resistance is particularly excellent, which ensures the service life of the magnesium alloy processing, thereby reducing the comprehensive use cost.
Do you know the harm of non-standard oil to equipment?
1. In comparison, non-standard base oil has a higher acid value, and its acidity is very corrosive to equipment. Equipment using non-standard oil tends to wear faster and consume more fuel. Many non-standard oils are used. There are pitting on the surface of the equipment, and this is the reason. Therefore, the use of non-standard oil not only does not provide protection, but may even have a destructive effect!
2. The viscosity index is low, and the viscosity-temperature performance is checked. When the temperature is low, the viscosity is large, and the flow resistance is large. When the temperature is high, it is as thin as water and the oil film is very thin; it does not have the proper protective effect and will cause damage to the equipment during long-term use. Larger wear.
3.The pour point is high. Since there is no dewaxing process in the production of non-standard base oils, it will solidify at a lower temperature, with poor fluidity, and easy to block the oil circuit.
4. Compared with the national standard base oil, the non-standard oil has poor oxidation resistance, short service life, and is easy to deteriorate; in other words, the oil change cycle is shortened, although the surface is cheap, but the available time is shorter!
Item | Reference Data | Testing Method |
Appearance | light yellow to reddish brown transparent liquid | visual inspection |
Open flash point℃ | >180 | GB/T267-1988 |
Density (15℃) | 0.880~0.910 | GB/T1884 |
Copper sheet corrosion 100℃1hr level | 4 | GB/T5096-85 |
Viscosity 40℃ | 10-13 | GB/T256-1988 |
*Typical data of the above data products, please refer to product inspection standards for quality indicators |
Two core elements
1. Lubricant quality level API
Compared with bad lubricating fluid, it has obvious improvement in anti-oxidation ability, cleaning and dispersion, fuel saving, etc.In addition, it is in the valve mechanism wear protection, anti-greasy dirt, prevent filter clogging, lubricating oil consumption and low temperature. The advantages of pumping and other aspects are obvious.
2. Lubricating oil viscosity grade SAE
The viscosity of lubricating oil is mostly marked by SAE grade. SAE only indicates the viscosity in extremely cold and extremely hot environments, and does not represent the quality of the oil. It is divided into winter oil ow sw 15w 20w 25W, summer oil 20 3040 5060 is A grade of 0w -40 represents multi-grade oil, which is common in winter and summer.
Contact Person: LFYRS