SGS Emulsified Cutting Fluid

High-quality metalworking fluids, cutting fluids, industrial lubricants, emulsified cutting fluids

performance:

YR8001D is suitable for the cutting of ferrous metals such as cast iron, alloy steel, carbon steel, including turning, drilling, boring, reaming and many other processing methods. The product has excellent lubricity, hard water cooling resistance and defoaming. Outstanding lubrication performance, It can ensure the surface finish of the machined surface. The hard water resistance is particularly excellent, which ensures the service life of the magnesium alloy processing, thereby reducing the comprehensive use cost.

1. Lubricant quality level API

Compared with bad lubricating fluid, it has obvious improvement in anti-oxidation ability, cleaning and dispersion, fuel saving, etc., in addition, in the valve mechanism wear protection, anti-greaser, prevent filter clogging, lubricating oil consumption and low temperature The advantages of pumping and other aspects are obvious.

2. Lubricating oil viscosity grade SAE

The viscosity of lubricating oil is mostly marked by SAE grade. SAE only indicates the viscosity in extremely cold and extremely hot environments, and does not represent the quality of the oil. It is divided into winter oil ow sw 15w 20w 25W, summer oil 20 3040 5060 is A grade of 0w -40 represents multi-grade oil, which is common in winter and summer.

Base oil

Dozens of technological processes were originally mined underground for thousands of meters to refine deep and refined national standard base oil!

additive

Adopt Lubrizol, Infineum, Chevron Oronite, and Afton's four major additive manufacturers in the world!

Reconciliation technology

Deeply refined high-quality base oils and additives advanced technology production and blending

Deployment instructions:

Recommended usage: light load processing: 5%, medium load processing: 5%-10%, heavy load processing: 10%-15%.

Prepare directly with industrial tap water (in order to obtain the best performance, the recommended water hardness range is <150ppm). When preparing, first add tap water to the liquid tank, and then stir (or circulate) while adding the original solution to the specified concentration. After opening the cycle use.

Applicable materials: cast iron, alloy steel, carbon steel and other ferrous metals

Storage instructions:

●Store at room temperature, avoid mixing sundries and other oils

●Avoid direct sunlight and exposure

●Avoid contact with strong oxidants, strong acids and strong bases

●The appearance of the product becomes darker in long-term storage, which does not affect the use effect

●If frozen at low temperature, it can be used after freezing at 20℃ without affecting the use effect

Uses: Cast iron, alloy steel, carbon steel and other ferrous metals cutting