Product Details:
Payment & Shipping Terms:
|
Product Name:: | Neat Cutting Oil | Origin:: | Hebei China |
---|---|---|---|
Brand Name:: | YARUNS | Application:: | Industrial Lubricants, Carbon Steel, Cast Iron, Stainless Steel And Other Ferrous Metals |
General Composition:: | Crude | Features:: | Cooling, Lubrication, Rust Prevention |
Main Ingredients:: | Anti-wear Cutting Fluid | Colour:: | Yellowish Brown |
High Light: | Emulsified Neat Cutting Oil,Antibacterial Neat Cutting Oil,Antibacterial Cutting Oil For Drilling Metal |
Cutting oil Environmentally friendly water-based environmentally friendly emulsified cutting fluid oil
Description:
High-quality cutting oil, suitable for all metal processing operations that usually use emulsified oil. The recommended concentration is between 3% and 5%, depending on the severity of processing. The product can even be successfully used in grinding operations and working in hard water conditions up to 700 PPM
Cutting oil-pure oil:
The pure cutting oil is particularly stable. Apart from filtering and centrifuging the fluid to remove chips and impurities, no further maintenance is usually required.
Pure cutting oil rarely needs to be replaced, because it is usually used in the machining process, because it will follow the machined parts and chips, so it needs to be constantly replenished. The exception is if the oil starts to oxidize, or the content of metal particles or deposits can cause problems.
There is also an application method called minimum lubrication, which is to spray a small amount of oil into the air and then apply it to the processing area under high pressure. The advantage is that fuel consumption is very low and cleaning requirements are reduced. The disadvantage is insufficient chip management and cooling. Therefore, minimal lubrication can only be used for certain processes and metals.
Item | Reference Data | Testing Method |
Appearance | light yellow to reddish brown transparent liquid | visual inspection |
Open flash point℃ | >180 | GB/T267-1988 |
Density (15℃) | 0.880~0.910 | GB/T1884 |
Copper sheet corrosion 100℃1hr level | 4 | GB/T5096-85 |
Viscosity 40℃ | 10-13 | GB/T256-1988 |
*Typical data of the above data products, please refer to product inspection standards for quality indicators |
Feature:
1. Good surface finish of mechanical parts
2. Excellent anti-rust performance
3. Does not react with painted machine components
4. Stability of hard water emulsion
5. Non-stick copper
6. Extend tool life
7. Good resistance to bacteria
8. Use economy
Contact Person: LFYRS