Product Details:
Payment & Shipping Terms:
|
Product Name:: | Circulating Oil Lubrication Systems | Usage:: | Remove Floating Oil |
---|---|---|---|
Core Component Warranty:: | 1 Year | Material:: | Steel |
Applicable Industries:: | Manufacturing Plants, Energy And Mining Industries | Place Of Origin:: | Hebei, China |
Certification:: | International Organization For Standardization | Core Components:: | Pumps, Motors |
High Light: | Lube Oil Purification System 300L/Time,Vacuum Lube Oil Purification System,lube oil purifier system 300L/Time |
High-quality vacuum lubricating oil purifier, lubricating oil purifier
Performance characteristics:
Vacuum system:
It consists of a vacuum tank, a vacuum pump, a condensate tank, a liquid accumulation tank and an air supplement system. The optimized structural design greatly increases the surface area of the oil in the vacuum system and maximizes the stroke of the oil in the vacuum system. Fully overflow the moisture and gas in the oil. This machine adopts an advanced defoaming system, so that the oil filter will never show the oil filling phenomenon common to similar products when it is working.
filtering system:
Three-stage filtration is adopted, and the coarse filter at the suction port protects the oil pump and prolongs the service life of the main filter. A secondary fine filter is installed behind the pump to make the oil quickly reach a high level of cleanliness. The filter material adopts special graded aperture glass fiber material, which can filter particles of different sizes layer by layer, greatly improving the service life of the filter element. With a complete filter element structure, it can effectively reduce the surface flow rate of the filter material and obtain stable filtration accuracy.
Heating system:
Using stepped heating, the surface heat load is less than 1.0W/cm2, and the oil will not deteriorate due to overheating. The oil temperature is arbitrarily adjusted from 0 to 100°C, automatically controlled, and equipped with a protection device. When the oil intake is too small, it will automatically stop working to avoid damage to the heater by dry burning.
Automatic Control System:
The vacuum oil filter adopts a series of automatic control instruments such as frequency converter, liquid level transmitter, temperature sensor, vacuum sensor, etc., to collect various information of equipment operation, and process it by the central processing unit to automatically control the operation of the equipment. The whole machine. Equipment operation and monitoring equipment operation status. This machine is equipped with various protection devices (overload protection, overvoltage protection, phase sequence protection, abnormal operation shutdown protection) to ensure the safe operation of the equipment.
Machine structure:
The integrated bridge structure of the whole machine reduces the volume. Adopt an integrated detachable fuel tank to ensure oil-free operation on the ground and reduce environmental pollution.
There are a variety of models to choose from, such as mobile, fixed, fully enclosed and vehicle-mounted.
Product name | Circulating Oil Lubrication Systems | Power supply | 220V |
Current | 5A | Dimensions | 1900*1300*1900MM |
Air pressure | 7KG | Temperature | Use environment 20-30 |
Weight | 500KG | Processing capacity | 300L/Time (each processing capacity of mixed waste liquid is 300L, each cycle takes 1-2 hours) |
Operating noise | 50 decibels |
Working principle:
The vacuum oil filter is designed according to the principle of different boiling points of water and oil. It consists of a vacuum heating tank fine filter, condenser, primary filter, water tank, vacuum pump, oil drain pump and electrical cabinet. The vacuum pump draws out the air in the vacuum tank to form a vacuum. Under the action of atmospheric pressure, the external oil enters the primary filter through the oil inlet pipe to remove larger particles, and then enters the heating tank. After heating, it passes through the oil at 40~75°C. Automatic drain valve, this valve automatically controls the balance of the amount of oil entering the vacuum tank. The heated oil is separated into a semi-mist by the rapid rotation of the spray wing, and the water in the oil quickly evaporates into water vapor, which is continuously sucked into the condenser by the vacuum pump. The water vapor entering the condenser is cooled and returned to the original water to be released. The oil in the vacuum heating oil tank is discharged into the fine filter through the oil discharge pump, and the particulate impurities are filtered through the oil filter paper or filter element, so that the entire process of the vacuum oil filter to remove impurities, moisture and gas in the oil is quickly completed, so that the clean oil is discharged The oil port is discharged.
Contact Person: LFYRS