Pneumatic CNC Lathe Cutting Oil Filtration System Emulsification Purifier YL-DJ-01/02/03

Pneumatic oil-water separator for CNC lathe, cutting fluid emulsification purifier YL-DJ-01/02/03

Equipment use
YL-DJ type cutting fluid purifier is used for purifying the cutting fluid tank of metal processing machine tools. Its main function: to remove oil, impurities and floating bubbles on the surface of the liquid tank, so that the surface of the liquid tank is kept in a clean state for a long time; the automatic aeration function in different periods can keep the cutting fluid in a flowing state for a long time, which can inhibit the growth of bacteria and avoid corruption in the tank smelly.
The YL-DJ cutting fluid purifier is small in size, flexible and convenient to move. It can be placed near the fluid tank of the machine tool for fixed use, or it can be moved and used in the workshop. It can be unattended after being turned on.
Long-term use of YL-DJ cutting fluid purifier can suppress the generation of odor in the workshop, extend the service life of cutting fluid, reduce emissions, and reduce business costs.

Features
1. Oil-water separation adopts physical separation and does not use chemical additives.
2. Intelligent control operation, as long as the button is pressed, the start and stop of the equipment can be automatically controlled, and it can be run in time intervals every day, and the running time can be set by yourself. Can be unattended.
3. The aeration pump is controlled by a single button, and it can run in time intervals every day, and the running time can be set by yourself. Can be unattended.
4. Low power consumption and no consumables.

Equipment structure

YL-DJ cutting fluid purifier is composed of the main body and peripherals
1. The electrical control part is installed in the electrical box, in which the timer can realize timing start and close, and can realize 16-segment start and stop settings.
2. The automatic operation button is to control the start and stop switch of the purification device; the aeration start button is to control the start and stop switch of the aeration pump. Set the operation timer of the aeration pump at the lower right corner of the electrical box; the empty button is not needed for a long time It is used to drain the liquid inside the machine during operation.
3. When the waste fuel tank alarm light (red) alarms, the red light is on, the purification device is in a shutdown state, and the oil level in the waste fuel tank has reached the upper limit. At this time, you need to open the fuel tank door to take out the waste fuel tank, dump the waste oil, and remove the waste fuel tank. Reset, then turn off the purification switch to reset it, and finally press the purification switch to restart the purification device and the red light will go out.
4. Power indicator light (green), the light will be on after the device plug is powered on.
5. The filter is installed on the left side of the fuselage to filter impurities. The filter element is made of stainless steel, with 100 meshes as standard. The filter element needs to be cleaned regularly.
6. The power cord is led out at the bottom of the right side of the fuselage, the plug is three holes, and it is connected to 220V (grounding is required).

Filter effect