Microemulsion Anti Rust Industrial Cutting Fluid For Drilling Metal

Microemulsion environmental protection and anti-rust metal processing cutting fluid YR8358

Performance:

YR8358 is suitable for cutting aerospace aluminum alloy, steel, cast iron, including turning, drilling, boring, reaming and other processing methods. The product has excellent rust resistance, cooling and defoaming performance, outstanding lubrication performance, and can ensure work The surface finish of the machined surface. At the same time, it has good hard water resistance and anti-corruption performance, and can be recycled for a long time, thereby reducing the comprehensive use cost.

Do you know the harm of non-standard oil to equipment?
1. In comparison, the acid value of non-standard base oil is higher, and the acidity is very corrosive to the equipment. Equipment using non-standard oil tends to wear faster and consume more fuel. Many non-standard oils are used. This is the reason for the pitting on the surface of the equipment. Therefore, the use of non-standard oil will not only provide no protection, but may even have a destructive effect!
2. The viscosity index is low, and the viscosity-temperature performance is checked. When the temperature is low, the viscosity is large, and the flow resistance is high. When the temperature is high, it is as thin as water and the oil film is very thin; Larger wear.
3. The pour point is high. Since there is no dewaxing process in the production of non-standard base oils, it will solidify at a lower temperature, with poor fluidity, and easy to block the oil circuit.
4. Compared with the national standard base oil, the non-standard oil has poor oxidation resistance, short service life, and is easy to deteriorate; in other words, the oil change cycle is shortened. Although the surface is cheaper on the market, the usable time is shorter!

Deployment instructions:

Recommended usage: light load processing: 5%, medium load processing: 5%-10%, heavy load processing: 10%-15%.
Prepare directly with industrial tap water (in order to obtain the best performance, the recommended water hardness range is <150ppm). When preparing, first add tap water to the liquid tank, and then stir (or cycle) while adding the original solution to the specified concentration. After opening the cycle use.
Applicable materials: alloy steel, carbon steel, aluminum alloy, some copper alloys, aviation aluminum alloy.

Storage instructions:

●Store at room temperature, avoid mixing sundries and other oils
●Avoid direct sunlight
●Avoid contact with strong oxidants, strong acids and strong bases
●If frozen at low temperature, it can be used after being completely dissolved in an environment of 20°C without affecting the use effect
●The darkening of the appearance of some products after long-term storage does not affect its use effect
Uses: alloy steel, carbon steel, aluminum alloy, part of copper alloy, aviation aluminum alloy processing.