2.0kW Cutting Fluid Filtration System oil water separation machine 220V

Oil-water separator to separate cutting fluid from waste oil, cutting fluid filtration system YL-SKCY-3000

Equipment use

This equipment is mainly used for large-scale equipment deep pit cutting fluid pool, centralized fluid supply pool, rolling fluid pool degreasing and liquid surface floating matter filtering. The equipment adopts automatic control, and can set daily start-up time and shutdown time. Unattended. When removing oil from the rolling fluid, the oil content in the rolling fluid can be controlled by setting the daily working time.

Features
1.The oil-water separation adopts physical separation and does not use chemical additives.
2.Intelligent control operation, automatic control of the start and stop of the equipment.
3.Nano bubbles accelerate the separation of oil and water.
4. Low power consumption and no consumables.

Equipment workflow

The equipment uses a special submersible pump to pump the liquid surface oil into the treatment tank. The treatment tank is equipped with a degreasing mechanism. The processed (oil-free) liquid enters the turnover tank. After the turnover tank is full, the drain pump starts to drain the liquid back to the liquid The slick oil is discharged into the settling tank to further purify the slick oil. The purified waste oil flows into the waste oil tank. The waste oil tank (200 liters) is full of oil and an alarm is issued. After the waste oil is manually discharged, the equipment restarts and continues to work.

Floating Inlet Device