High Efficiency Semi Synthetic Cutting Fluid 1000 Liter Non Phenolic

Attractive price high-efficiency water-based semi-synthetic cutting fluid

Introduction

Semi-synthetic coolants are metalworking fluid concentrates that contain a small amount of oil (usually less than 30%) as well as synthetic lubricants and other additives. When mixed with water, they form a translucent fluid. Semi-synthetics combine the physical lubricity of soluble oils with the chemical lubricity, cooling and cleanliness of synthetic coolants.
Semi-synthetic coolants are a good compromise between the water-soluble oils and synthetics – they are hybrid products of both water soluble oils and synthetics. Therefore, they carry both the advantages and disadvantages of both groups. Semi-synthetics are less likely to cause rust than synthetics, will still provide rust protection because of their oil content and will emulsify tramp oils. Semi-synthetics are suited ideally for machining and grinding of cast iron. Manufacturers will formulate different grades of products, so that there are products available for all types of machining operations. Each category of coolant can have low- to high-grade products. Typically, the higher the price of the product, the better performance it will give. Just because a metalworking fluid is lower in price does not mean that the customer will save money in the long run, because tool life can be affected greatly by metalworking fluids.

Features

· Forms a translucent micro emulsion in most waters.

· Highly resistant to bacterial and fungal degradation, giving freedom from bad smells and slimy deposits.

· Good inhibition against corrosion of a wide range of ferrous metals, giving protection to both workpiece and machine part. Also, good resistance to contact corrosion, so workpieces may be stacked without staining.

· Inhibited against staining of various non-ferrous metals, including copper and its alloys and aluminium and its alloys.

· Non-phenolic, low odour, nitrate free and based on highly refined mineral oil, thus optimising operator acceptability.

· Low foaming and compatible with machine tool components.

Recommended user diluyion
1.Turning, Milling, Sawing: 3 - 8 %
2.Drilling, Screw cutting, Tapping: 3 - 8 %

application
It is recommended for the processing of ferrous and non-ferrous metals. Applications include grinding, milling, drilling, turning, boring, punching, reaming, broaching, grooving and tapping. It is also used in the machine tool industry, radial drilling machines, conventional lathes, CNC rotary tool holders, CNC machining centers, milling machines, flat shears, angle shears and vertical machining centers.